Landcruiser AWD L6-4.5L (1FZ-FE) (1997)
/Page-1506001.png)
Solenoid: Service and Repair
Front
REPLACEMENT
1. To begin the removal, start by shifting the front differential lock.
2. Remove the actuator by performing the following.
a. Disconnect the connector and tube.
b. Remove the 2 nuts, bolt and actuator.
c. Remove the O-ring from the actuator.
3. Install the actuator by performing the following procedures.
a. Check that the outermost rack tooth of the shift fork is virtually above the center line of the actuator installation hole.
