Landcruiser AWD L6-4.5L (1FZ-FE) (1997)
/Page-1510026.png)
f.
Apply adhesive, part No. 08833 - 00080, THREE BOND 1344, LOCTITE 242 or equivalent to 2 or 3 threads of the mount bolt end.
g. Tighten the shaft retainer with the 2 bolts to 24 Nm (17 ft. lbs.).
h. Using a pin punch and hummer, install the slotted spring pin to the shift fork.
i.
Shift the fork deeply and keep the differential lock condition.
j.
Install the ball, compression spring and spring seat.
k. Clean the threads of 2 plugs and plug holes with toluene or trichloroethylene.
l.
Apply adhesive, part no. 08833 - 00080, THREE BOND 1344, LOCTITE 242 or equivalent to the plug threads.
m. Using a hexagon wrench, install and tighten the screw plugs to 22 Nm (16 ft. lbs.).
28. Measure the distance between sleeve and differential case end side by measuring the distance between the sleeve and tip of the differential case
when differential is free and locked. The standard distances are as follows:
