Landcruiser AWD L6-4.5L (1FZ-FE) (1997)
/Page-1517004.png)
10. Connect the connectors and tube
NOTE:
^
The depth of the insertion of the bleeder tube into the hose is approx. 15 mm (0.59 inch).
^
Take care that the water or the equivalent will not adhere to the connectors and hose.
11. Install the protector with the 2 nuts and bolt tightening the nut to 35 Nm (26 ft. lbs.) and the bolt to 20 Nm (14 ft. lbs.).
12. With the ignition switch ON, turn the differential lock control switch to OFF to cancel the differential lock.
