Landcruiser AWD L6-4.5L (1FZ-FE) (1997)
Wiper Motor: Testing and Inspection
FRONT WIPER MOTOR INSPECTION
INSPECT MOTOR OPERATION
Low Speed:
Connect the positive (+) lead from the battery to terminal 3 and negative (-) lead to terminal 1, and check that the motor operates at low speed.
If operation is not as specified, replace the motor.
High Speed:
Connect the positive (+) lead from the battery to terminal 2 and the negative (-) lead to terminal 1, and check that the motor operates at high speed.
If operation is not as specified, replace the motor.
Stopping at Stop Position:
1. Operate the motor at low speed and stop the motor operation anywhere except at the stop position by disconnecting positive (+) lead from terminal
3.
2. Connect terminal 3 and 5.
3. Connect the positive (+) lead from the battery to terminal 6 and the negative (-) lead to terminal 1, and check that the motor stops running at the
stop position after the motor operates again.
If operation is not as specified. replace the motor.