Landcruiser AWD V8-4.7L (2UZ-FE) (1998)
/Page-2223002.png)
1. REMOVE LOWER FRAME BRACKET GARNISH
Using a screwdriver, remove the lower frame bracket garnish.
HINT:
Tape the screwdriver tip before use.
2. REMOVE POWER WINDOW SWITCH
(a) Using a screwdriver, remove the power window switch as shown in the illustration.
HINT:
Tape the screwdriver tip before use.
(b) Disconnect the connector.
3. REMOVE DOOR INSIDE HANDLE BEZEL
(a) Using a screwdriver, open the cover as shown in the illustration.
HINT:
Tape the screwdriver tip before use.
(b) Remove the screw.
(c) Using a screwdriver, remove the inside handle bezel as shown in the illustration.
