Matrix L4-1.8L (1ZZ-FE) (2008)
INSTALLATION
HINT:
-
Use the same procedures for the RH side and LH side.
-
The procedures listed below are for the RH side.
1. INSTALL FRONT SEAT INNER BELT ASSEMBLY RH
(a) Connect the connector and engage the clamps.
(b) Engage the wire harness of the inner belt to the cushion shield inner RH.
(c) Install the cushion shield inner RH (with wire harness) with the screw.
(d) Install the belt with the bolt.
Torque: 41 Nm (418 kgf-cm, 30 ft-lbf)
2. INSTALL FRONT SEAT ASSEMBLY RH (See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Front Seat Assembly (for
RH Side)/Installation)