Matrix 2WD L4-1.8L (1ZZ-FE) (2003)
/Page-867001.png)
Starter Motor: Service and Repair
Removal and Installation
STARTER ASSY
REPLACEMENT
1. REMOVE ENGINE UNDER COVER RH
2. REMOVE STARTER ASSY
a. Disconnect the starter connector.
b. Remove the nut and disconnect the starter wire.
c. Remove the 2 bolts and starter.
3. INSTALL STARTER ASSY
Torque:
Bolt 37 N.m (378 kgf.cm, 27 ft.lbf)
Nut 9.8 N.m (100 kgf.cm, 7 ft.lbf)