Matrix 4WD L4-1.8L (1ZZ-FE) (2004)
Crankshaft Position Sensor: Testing and Inspection
CRANK POSITION SENSOR NO.1
Using an ohmmeter, measure the resistance between terminals.
RESISTANCE:
At cold .........835 - 1,400 ohm
At hot ............1,060 - 1,645 ohm
NOTE: "Cold" and "Hot" on the table express the temperature of the coils themselves. "Cold" is from -10 °C (14 °F) to 50 °C (122 °F) and "Hot" is
from 50 °C (122 °F) to 100 °C (212 °F).
HINT: If the resistance is not as specified, replace the crank position sensor No.1
CRANK POSITION SENSOR
Using an ohmmeter, measure the resistance between terminals.
RESISTANCE:
At cold ..........1,630 - 2,740 ohm
At hot .............2,065 - 3,225 ohm
NOTE: "Cold" and "Hot" on the table express the temperature of the coils themselves. "Cold" is from -10 °C (14 °F) to 50 °C (122 °F) and "Hot" is
from 50 °C (122 °F) to 100 °C (212 °F).
HINT: If the resistance is not as specified, replace the crank position sensor.