Matrix AWD L4-2.4L (2AZ-FE) (2009)
27. INSTALL STEERING PAD See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Steering Pad/Installation
28. INSTALL LOWER NO. 3 STEERING WHEEL COVER See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Steering
Pad/Installation
29. INSTALL LOWER NO. 2 STEERING WHEEL COVER See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Steering
Pad/Installation
30. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTE: When reconnecting the cable to the negative (-) battery terminal after installing the steering sensor, check that the front tires and
steering wheel are kept aligned straight ahead before and after connecting the cable to the negative (-) battery terminal.
31. INSPECT STEERING PAD See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Steering Pad/Installation
32. INSPECT SRS WARNING LIGHT See: Restraint Systems/Air Bag Systems/Testing and Inspection/Initial Inspection and Diagnostic
Overview/Diagnosis System