Matrix AWD L4-2.4L (2AZ-FE) (2009)
4. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine Assembly/Installation
5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
6. PERFORM INITIALIZATION
HINT: Initialization cannot be completed by only removing the cable from the battery.
(a) Perform Reset Memory (AT initialization) when replacing the ECM. (for Automatic Transaxle)
HINT:
-
See: Transmission Control Systems/Testing and Inspection/Programming and Relearning (for U250E)
-
See: Transmission Control Systems/Testing and Inspection/Programming and Relearning (for U140F)
(b) Perform Registration (VIN registration) when replacing the ECM See: Computers and Control Systems/Testing and Inspection/Programming
and Relearning.