Matrix FWD L4-1.8L (2ZR-FE) (2010)
(d) Remove the front door glass sub-assembly as shown in the illustration.
NOTICE:
Do not damage the door glass.
20. REMOVE FRONT DOOR GLASS SUB-ASSEMBLY (w/ Power Window)
(a) Connect the negative battery terminal.
(b) Connect the power window regulator master switch assembly and move the front door glass sub-assembly so that the door glass bolts can be
seen.
(c) Disconnect the cable from the negative (-) battery terminal and power window regulator master switch assembly.
(d) Remove the 2 bolts.
NOTICE:
After the bolts are removed, do not allow the door glass to fall.
(e) Remove the front door glass sub-assembly as shown in the illustration.
NOTICE:
Do not damage the door glass.
21. REMOVE FRONT DOOR WINDOW REGULATOR ASSEMBLY (w/o Power Window)
(a) Remove the 5 bolts and the front door window regulator assembly.