Matrix FWD L4-1.8L (2ZR-FE) (2010)
22. REMOVE FRONT DOOR WINDOW REGULATOR SUB-ASSEMBLY (w/ Power Window)
(a) Disconnect the connector.
(b) Loosen the temporary bolt.
NOTICE:
Do not remove the temporary bolt. If the temporary bolt is removed, the front door window regulator may fall and cause damage.
(c) Remove the 5 bolts.
(d) Remove the front door window regulator sub-assembly and the front power window regulator motor assembly as a unit.
(e) Remove the temporary bolt from the front door window regulator sub-assembly.
23. REMOVE FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY (w/ Power Window)
(a) Using a "TORX" socket wrench (T25), remove the 3 screws and the front power window regulator motor assembly.
24. REMOVE FRONT DOOR GLASS RUN
(a) Remove the front door glass run.
25. REMOVE FRONT DOOR REAR LOWER FRAME SUB-ASSEMBLY
(a) Remove the bolt and the front door rear lower frame sub-assembly as shown in the illustration.