Matrix FWD L4-1.8L (2ZR-FE) (2010)
(b) Remove the front door service hole cover.
HINT
Remove any remaining butyl tape from the door.
18. REMOVE OUTER REAR VIEW MIRROR ASSEMBLY WITH COVER
(a) Disengage the clip.
(b) Disconnect the connector.
(c) Remove the 3 screws.
(d) Disengage the claw and remove the outer rear view mirror assembly with cover.
19. REMOVE FRONT DOOR GLASS SUB-ASSEMBLY (w/o Power Window)
(a) Install the front door window regulator handle assembly and move the front door glass sub-assembly so that the door glass bolts can be seen.
(b) Remove the front door window regulator handle assembly.
(c) Remove the 2 bolts.
NOTICE:
After the bolts are removed, do not allow the door glass to fall.