Matrix FWD L4-1.8L (2ZR-FE) (2010)
(a) Using a screwdriver, disengage the 3 claws.
HINT
Tape the screwdriver tip before use.
(b) Remove the front door inside locking cable assembly.
37. REMOVE FRONT DOOR OUTSIDE HANDLE FRAME SUB-ASSEMBLY
(a) Using a "TORX" socket wrench (T30), remove the screw.
(b) Using pliers, disengage the grommet as shown in the illustration.
(c) Disengage the claw and remove the front door outside handle frame sub-assembly.
38. REMOVE FRONT DOOR LOCK OPEN ROD
(a) Remove the front door lock open rod as shown in the illustration.