Matrix FWD L4-1.8L (2ZR-FE) (2010)
23. INSTALL FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY (w/ Power Window)
NOTICE:
The regulator arm must be below the intermediate position when installing the power window regulator motor.
(a) Using a "TORX" socket wrench (T25), install the front power window regulator motor assembly with the 3 screws.
Torque : 5.4 Nm (55 kgf-cm, 48 in-lbf)
HINT
The new front window regulator uses self-tapping screws to thread new installation holes.
24. INSTALL FRONT DOOR WINDOW REGULATOR ASSEMBLY (w/o Power Window)
(a) Apply MP grease to the sliding parts of the front door window regulator assembly.
(b) Install the front door window regulator assembly with the 5 bolts.
Torque : 8.0 Nm (82 kgf-cm, 71 in-lbf)
25. INSTALL FRONT DOOR WINDOW REGULATOR SUB-ASSEMBLY (w/ Power Window)
(a) Apply MP grease to the sliding parts of the front door window regulator sub-assembly.
(b) Install the temporary bolt to the front door window regulator sub-assembly.