Matrix FWD L4-1.8L (2ZR-FE) (2010)
NOTICE:
If the bellcrank lever is not pulled and held when installing the outside handle, the bellcrank lever will interfere with the outside
handle and the release plate will be damaged.
(b) Insert the rear end of the rear door outside handle assembly into the rear door outside handle frame slide the rear door outside handle assembly
toward the front of the vehicle to install it.
11. INSTALL REAR DOOR OUTSIDE HANDLE COVER
(a) Engage the 3 claws to install the rear door outside handle cover.
(b) Using a "TORX" socket wrench (T30), install the rear door outside handle cover with the screw.
Torque : 4.0 Nm (41 kgf-cm, 35 in-lbf)
12. INSTALL REAR DOOR INSIDE LOCKING CABLE ASSEMBLY (w/o Power Door Lock)
(a) Install the rear door inside locking cable assembly.
13. INSTALL REAR DOOR INSIDE LOCKING CABLE ASSEMBLY (w/ Power Door Lock)
(a) Install the rear door inside locking cable assembly.