Matrix FWD L4-1.8L (2ZR-FE) (2010)
Hood Latch Release Cable: Service and Repair
Removal
DOOR / HATCH: HOOD LOCK CONTROL CABLE ASSEMBLY: REMOVAL
1. REMOVE FRONT WHEEL
2. REMOVE FRONT FENDER LINER
(a) Using a screwdriver, turn the pin 90 degrees and remove the pin hold clip.
(b) Remove the 9 clips and 5 screws.
(c) Remove the 3 grommets and the front fender liner.
HINT
The grommets need to be replaced with new ones because they will break when they are removed.
3. REMOVE HOOD LOCK ASSEMBLY
(a) Remove the 3 bolts and the hood lock assembly.
(b) Disconnect the hood lock control cable.