Matrix FWD L4-1.8L (2ZR-FE) (2010)
Liftgate Window Glass: Service and Repair
Installation
WINDOW / GLASS: BACK DOOR GLASS: INSTALLATION
1. INSTALL BACK WINDOW GLASS ADHESIVE DAM
(a) Using a brush or a sponge, coat the application area of the a new back window glass adhesive dam with Primer G.
NOTICE:
*
Do not apply too much primer.
*
Allow the primer to dry for 3 minutes or more.
*
Throw away any leftover primer.
HINT
If an area other than that specified is coated by accident, wipe off the primer with a clean piece of cloth before it dries.
(b) Install a new back window glass adhesive dam as shown in the illustration.
Standard Dimension:
2. INSTALL BACK DOOR GLASS
(a) Using a brush, coat the installation surface on the vehicle body with Primer M.
NOTICE:
*
Do not coat the adhesive with primer M.
*
Do not apply too much primer.