Matrix FWD L4-1.8L (2ZR-FE) (2010)
HINT
Perform the same procedure for the LH side.
27. TEMPORARILY TIGHTEN REAR NO. 1 SUSPENSION ARM ASSEMBLY LH See: Steering and Suspension/Suspension/Rear
Knuckle/Service and Repair/Installation
28. TEMPORARILY TIGHTEN REAR NO. 1 SUSPENSION ARM ASSEMBLY RH
HINT
Perform the same procedure for the LH side.
29. INSTALL REAR STABILIZER LINK ASSEMBLY LH See: Steering and Suspension/Suspension/Rear Knuckle/Service and Repair/Installation
30. INSTALL REAR STABILIZER LINK ASSEMBLY RH
HINT
Perform the same procedure for the LH side.
31. INSTALL NO. 3 PARKING BRAKE CABLE ASSEMBLY
(a) Install the No. 3 parking brake cable assembly with the bolt.
Torque : 8.0 Nm (82 kgf-cm, 71 in-lbf)
NOTICE:
Do not twist the No. 3 parking brake cable assembly when installing it.
(b) Install the No. 3 parking brake cable assembly with the 2 bolts.
Torque : 6.0 Nm (61 kgf-cm, 53 in-lbf)
NOTICE:
Do not twist the No. 3 parking brake cable assembly when installing it.
32. INSTALL NO. 2 PARKING BRAKE CABLE ASSEMBLY
HINT
Perform the same procedure for the No. 3 parking brake cable assembly.
33. APPLY HIGH TEMPERATURE GREASE (for LH Side) See: Brakes and Traction Control/Parking Brake System/Service and
Repair/Reassembly
34. INSTALL NO. 1 PARKING BRAKE SHOE HOLD DOWN SPRING PIN (for LH Side) See: Brakes and Traction Control/Parking Brake
System/Service and Repair/Reassembly