Matrix FWD L4-1.8L (2ZR-FE) (2010)
52. INSTALL NO. 2 PARKING BRAKE SHOE HOLD DOWN COMPRESSION SPRING (for RH Side)
HINT
Perform the same procedure for the LH side.
53. INSTALL PARKING BRAKE SHOE STRUT (for RH Side)
HINT
Perform the same procedure for the LH side.
54. INSTALL NO. 1 PARKING BRAKE SHOE HOLD DOWN COMPRESSION SPRING (for RH Side)
HINT
Perform the same procedure for the LH side.
55. INSTALL NO. 2 PARKING BRAKE SHOE RETURN TENSION SPRING (for RH Side)
HINT
Perform the same procedure for the LH side.
56. INSTALL NO. 3 PARKING BRAKE SHOE RETURN TENSION SPRING (for RH Side)
HINT
Perform the same procedure for the LH side.
57. CHECK PARKING BRAKE INSTALLATION See: Brakes and Traction Control/Parking Brake System/Service and Repair/Reassembly
58. INSTALL REAR SPEED SENSOR WIRE LH (for 2WD)
(a) Install the rear speed sensor wire LH with the bolt and nut.
Bolt - Torque : 8.0 Nm (82 kgf-cm, 71 in-lbf)
Nut - Torque : 5.0 Nm (51 kgf-cm, 44 in-lbf)
NOTICE:
Do not twist the rear speed sensor wire LH when installing it.
(b) Install the rear speed sensor wire LH with the bolt.
Torque : 8.0 Nm (82 kgf-cm, 71 in-lbf)
NOTICE:
Do not twist the rear speed sensor wire LH when installing it.