Matrix FWD L4-1.8L (2ZR-FE) (2010)
/Page-2122001.png)
Console Lamp: Service and Repair
Removal
LIGHTING (INT): PERSONAL LIGHT: REMOVAL
1. REMOVE MAP LIGHT ASSEMBLY (w/o Sliding Roof)
(a) Using a moulding remover, disengage the 4 clips.
(b) Disconnect the connector and remove the map light assembly.
2. REMOVE MAP LIGHT ASSEMBLY (w/ Sliding Roof)
(a) Using a moulding remover, disengage the 4 clips.
(b) Disconnect the connector and remove the map light assembly.
3. REMOVE MAP LIGHT BULB (w/o Sliding Roof)
(a) Turn the 2 map light bulbs and the 2 map light sockets in the direction indicated by the arrow and remove them as a unit.
(b) Remove the 2 map light bulbs from the 2 map light sockets.
4. REMOVE MAP LIGHT BULB (w/ Sliding Roof)
(a) Turn the 2 map light bulbs and the 2 map light sockets in the direction indicated by the arrow and remove them as a unit.
