Matrix FWD L4-1.8L (2ZR-FE) (2010)
(e) Protect the curtain shield airbag assembly.
(1) Cover the airbag with a 700 mm (27.5 in.) x 120 mm (4.72 in.) cloth or piece of nylon and secure the ends of the cover with tape, as shown
in the illustration.
NOTICE:
Cover the curtain shield airbag with a protective cover as soon as the front pillar garnish is removed.
15. REMOVE FRONT DOOR SCUFF PLATE RH
HINT
Use the same procedure for the RH side and LH side.
16. REMOVE COWL SIDE TRIM BOARD RH
HINT
Use the same procedure for the RH side and LH side.
17. REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP RH
HINT
Use the same procedure for the RH side and LH side.
18. REMOVE FRONT PILLAR GARNISH RH (w/o Curtain Shield Airbag)
HINT
Use the same procedure for the RH side and LH side.
19. REMOVE FRONT PILLAR GARNISH RH (w/ Curtain Shield Airbag)
(a) Pull the upper part of the garnish toward the inside of the cabin and disengage the 2 clips.