Matrix FWD L4-1.8L (2ZR-FE) (2010)
Keyless Entry Transmitter Battery: Service and Repair
DOOR LOCK: TRANSMITTER BATTERY: REPLACEMENT
1. REMOVE TRANSMITTER HOUSING COVER
(a) Using a screwdriver with its tip wrapped in protective tape, pry open the transmitter housing cover.
NOTICE:
Do not forcibly pry the cover.
2. REMOVE DOOR CONTROL TRANSMITTER MODULE
(a) Using a screwdriver with its tip wrapped in protective tape, remove the door control transmitter module from the transmitter housing case.
NOTICE:
Handle each part with care as they are delicate electrical parts.
3. REMOVE TRANSMITTER BATTERY
(a) Twist the coin in the direction of the arrow in the illustration, and remove the transmitter battery cover.
(b) Remove the battery (lithium battery: CR2025).
NOTICE:
*
Do not push the terminals with a finger.