Matrix FWD L4-1.8L (2ZR-FE) (2010)
23. REMOVE TRANSPONDER KEY AMPLIFIER (w/ Engine Immobiliser System) See: Steering and Suspension/Steering/Steering
Column/Service and Repair/Removal and Replacement/Removal
24. REMOVE STOP LIGHT SWITCH ASSEMBLY See: Lighting and Horns/Brake Light Switch/Service and Repair/Removal
25. REMOVE STEERING POST ASSEMBLY See: Steering and Suspension/Steering/Steering Column/Service and Repair/Removal and
Replacement/Removal
26. REMOVE STEERING COLUMN UPPER WITH SWITCH BRACKET ASSEMBLY See: Steering and Suspension/Steering/Steering
Column/Service and Repair/Overhaul/Disassembly
27. REMOVE IGNITION OR STARTER SWITCH ASSEMBLY (for Manual Transaxle) See: Steering and Suspension/Steering/Steering
Column/Service and Repair/Overhaul/Disassembly
28. REMOVE IGNITION OR STARTER SWITCH ASSEMBLY (for Automatic Transaxle) See: Steering and Suspension/Steering/Steering
Column/Service and Repair/Overhaul/Disassembly
29. REMOVE KEY INTERLOCK SOLENOID (for Automatic Transaxle) See: Steering and Suspension/Steering/Steering Column/Service and
Repair/Overhaul/Disassembly
30. REMOVE SOLENOID WIRE (for Automatic Transaxle) See: Steering and Suspension/Steering/Steering Column/Service and
Repair/Overhaul/Disassembly
31. REMOVE IGNITION SWITCH LOCK CYLINDER ASSEMBLY See: Steering and Suspension/Steering/Steering Column/Service and
Repair/Overhaul/Disassembly
32. REMOVE UNLOCK WARNING SWITCH ASSEMBLY
(a) Remove the unlock warning switch assembly by pushing up the center part and releasing the 2 claws.
HINT
Slide the unlock warning switch in the direction shown by the arrow in the illustration to remove it.
Installation
DOOR LOCK: UNLOCK WARNING SWITCH: INSTALLATION
1. INSTALL UNLOCK WARNING SWITCH ASSEMBLY
(a) Attach the 2 claws to install the unlock warning switch onto the steering column upper bracket.