Matrix FWD L4-1.8L (2ZR-FE) (2010)
/Page-2207001.png)
Sunroof / Moonroof Switch: Testing and Inspection
SLIDING ROOF / CONVERTIBLE: SLIDING ROOF SWITCH ASSEMBLY: INSPECTION
1. INSPECT SLIDING ROOF SWITCH ASSEMBLY (MAP LIGHT ASSEMBLY)
(a) Remove the sliding roof switch assembly (map light assembly).
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
(c) If the result is not as specified, replace the sliding roof switch assembly (map light assembly).
(d) Measure the voltage using diode test mode.
Standard Voltage:
