Matrix FWD L4-1.8L (2ZR-FE) (2010)
(f) Remove the clamp.
(g) Remove the bolt and front speed sensor.
NOTICE:
*
Prevent foreign matter from attaching to the sensor tip.
*
Clean the installation hole and the contact surface for the speed sensor every time it is removed.
Installation
BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: FRONT SPEED SENSOR: INSTALLATION
HINT
*
Use the same procedure for the RH side and LH side.
*
The procedure listed below is for the LH side.
*
If the sensor rotor needs to be replaced, replace it together with the front drive shaft assembly.
1. INSTALL FRONT SPEED SENSOR
(a) Install the front speed sensor with the bolt.