Matrix FWD L4-1.8L (2ZR-FE) (2010)
Torque : 8.5 Nm (87 kgf-cm, 75 in-lbf)
NOTICE:
*
Prevent foreign matter from attaching to the sensor tip.
*
Do not file the hole or the contact surface because the gap between the magnet rotor and front speed sensor is important.
(b) Install the clamp to the shock absorber.
(c) Temporarily install the No. 1 sensor clamp to the shock absorber.
(d) Install the brake flexible hose with the bolt.