Matrix FWD L4-1.8L (2ZR-FE) (2010)
5. REMOVE COMBINATION METER ASSEMBLY See: Instrument Panel, Gauges and Warning Indicators/Instrument Cluster / Carrier/Service
and Repair/Removal and Replacement/Removal
6. REMOVE BRAKE PEDAL RETURN SPRING
(a) Remove the brake pedal return spring from the brake pedal support sub-assembly.
7. SEPARATE BRAKE MASTER CYLINDER PUSH ROD CLEVIS
(a) Remove the clip and push rod clevis pin, and separate the brake master cylinder push rod clevis from the brake pedal sub-assembly.
8. REMOVE STOP LIGHT SWITCH ASSEMBLY See: Lighting and Horns/Brake Light Switch/Service and Repair/Removal
9. REMOVE STOP LIGHT SWITCH MOUNTING ADJUSTER
(a) Remove the stop light switch mounting adjuster from the brake pedal support sub-assembly.
10. REMOVE BRAKE PEDAL SUPPORT SUB-ASSEMBLY
(a) Remove the bolt and separate the brake pedal support sub-assembly from the instrument panel reinforcement.
(b) Disengage the 2 clamps from the brake pedal support sub-assembly.
(c) Remove the 4 nuts and brake pedal support sub-assembly.