Matrix FWD L4-1.8L (2ZR-FE) (2010)
/Page-1403002.png)
NOTICE:
*
Do not allow any foreign matter to enter the brake master cylinder reservoir assembly.
*
Make sure that fluid supply is not hindered after cutting the tube.
(b) Install the brake master cylinder reservoir assembly to the master cylinder body.
(c) Mount the brake master cylinder sub-assembly in a vise.
NOTICE:
Place aluminum plates on the vise to prevent damage to the brake master cylinder sub-assembly.
(d) Using a pin punch and a hammer, tap in the straight pin.
3. INSTALL BRAKE MASTER CYLINDER RESERVOIR STRAINER
4. INSTALL BRAKE MASTER CYLINDER RESERVOIR FILLER CAP ASSEMBLY
