Matrix FWD L4-1.8L (2ZR-FE) (2010)
without a union nut wrench - Torque : 15 Nm (155 kgf-cm, 11 ft-lbf)
with a union nut wrench - Torque : 14 Nm (143 kgf-cm, 10 ft-lbf)
NOTICE:
*
Use a torque wrench with a fulcrum length of 250 mm (9.84 in.).
*
This torque value is effective when the union nut wrench is parallel to the torque wrench.
(d) Install the brake line clamp with the bolt.
Torque : 5.4 Nm (55 kgf-cm, 48 in-lbf)
(e) Connect the actuator connector and lock the lock lever.
NOTICE:
Make sure that the connector is locked securely.
4. INSTALL BRAKE ACTUATOR WITH BRACKET (for 2ZR-FE)
(a) Install the brake actuator with bracket to the body with the 2 bolts and nut.
Torque : 19 Nm (194 kgf-cm, 14 ft-lbf)