toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Brake Actuator (w/ VSC)|Page 4682 > < Brake Actuator (w/ VSC)|Page 4680
Page 10
background image

Torque : 5.5 Nm (56 kgf-cm, 49 in-lbf)

(b) Install the bolt and clamp, and connect the washer hoses and motor connectors.

Torque : 5.5 Nm (56 kgf-cm, 49 in-lbf)

6. INSTALL RADIATOR RESERVE TANK SUB-ASSEMBLY

(a) Install the radiator reserve tank sub-assembly with the 3 bolts.

Torque : 7.0 Nm (71 kgf-cm, 62 in-lbf)

7. INSTALL FRONT BUMPER ASSEMBLY

HINT
Refer to the instructions for Installation of the front bumper assembly  
  See: Body and Frame/Bumper/Front Bumper/Service and
Repair/Removal and Replacement/Installation.

8. INSTALL GENERATOR ASSEMBLY (for 2ZR-FE)

HINT
Refer to the instructions for Installation of the generator assembly  
  See: Starting and Charging/Charging System/Alternator/Service
and Repair/Removal and Replacement/Installation.

9. INSTALL GENERATOR ASSEMBLY (for 2AZ-FE)

HINT
Refer to the instructions for Installation of the generator assembly  
  See: Starting and Charging/Charging System/Alternator/Service
and Repair/Removal and Replacement/Installation.

Brake Actuator (w/ VSC)|Page 4682 > < Brake Actuator (w/ VSC)|Page 4680