Matrix FWD L4-18L (2ZR-FE) Front Speed Sensor Service and Repair Guide
Torque : 29 Nm (296 kgf-cm, 21 ft-lbf)
NOTICE:
*
Do not twist the wire harness for the front speed sensor when installing it.
*
Tighten the brake flexible hose and front speed sensor together with the bolt. Make sure that the front speed sensor is positioned
over the flexible hose.
(e) Install the No. 2 sensor clamp to the body with the bolt.
Torque : 8.0 Nm (82 kgf-cm, 71 in-lbf)
(f) Connect the speed sensor wire harness clamp.