Matrix FWD L4-1.8L (2ZR-FE) (2010)
Coolant Temperature Sensor/Switch (For Computer): Service and Repair
Removal
2ZR-FE ENGINE CONTROL: ENGINE COOLANT TEMPERATURE SENSOR: REMOVAL
1. DRAIN ENGINE COOLANT See: Coolant/Service and Repair
2. REMOVE NO. 2 CYLINDER HEAD COVER See: Engine/Service and Repair/Removal and Replacement/Engine Assembly/Removal
3. REMOVE AIR CLEANER CAP SUB-ASSEMBLY WITH HOSE See: Powertrain Management/Fuel Delivery and Air Induction/Throttle
Body/Service and Repair/Removal
4. REMOVE ENGINE COOLANT TEMPERATURE SENSOR
(a) Disconnect the engine coolant temperature sensor connector.
(b) Remove the engine coolant temperature sensor and gasket.