Matrix FWD L4-1.8L (2ZR-FE) (2010)
A. Turn bolt C to adjust the tension of the V-ribbed belt.
B. Tighten bolts A and B.
Torque:
Bolt A: 19 N*m (190 kgf*cm, 14 ft*lbf)
Torque:
Bolt B: 43 N*m (438 kgf*cm, 32 ft*lbf)
NOTICE
Do NOT loosen bolt D.
7. Inspect the V-ribbed belt tension and deflection.
Refer to step 2 in this bulletin for inspection procedure.
8. Install the engine under cover RH.
9. Install the No.2 cylinder head cover.
Engage the 4 clips to install the No.2 cylinder head cover.
NOTICE
^
Be sure to engage the clips securely.
^
Do NOT apply excessive force or hit the cover to engage the clips. This may damage the cover.
10. Confirm the noise is no longer present.