Matrix FWD L4-1.8L (2ZR-FE) (2010)
Intake Manifold: Service and Repair
Removal
2ZR-FE INTAKE / EXHAUST: INTAKE MANIFOLD: REMOVAL
1. DRAIN ENGINE COOLANT See: Cooling System/Coolant/Service and Repair
2. REMOVE NO. 2 CYLINDER HEAD COVER See: Service and Repair/Removal and Replacement/Engine Assembly/Removal
3. REMOVE AIR CLEANER CAP SUB-ASSEMBLY WITH HOSE See: Powertrain Management/Fuel Delivery and Air Induction/Throttle
Body/Service and Repair/Removal
4. REMOVE THROTTLE BODY ASSEMBLY See: Powertrain Management/Fuel Delivery and Air Induction/Throttle Body/Service and
Repair/Removal
5. REMOVE INTAKE MANIFOLD
(a) Remove the bolt and disconnect the wire harness bracket.
(b) Disconnect the 3 hoses.
(c) Remove the 4 bolts, 2 nuts, intake manifold stay and intake manifold.
(d) Remove the gasket from the intake manifold.
(e) Remove the bolt and bracket.
(f) Using a "TORX" socket E6, remove the 2 stud bolts from the intake manifold.