Matrix FWD L4-1.8L (2ZR-FE) (2010)
/Page-1796007.png)
(b) Remove the O-ring from the liquid pipe sub-assembly.
NOTICE:
Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.
15. REMOVE CONDENSER ASSEMBLY WITH RECEIVER
(a) Remove the condenser assembly with receiver as shown in the illustration.
Installation
HEATING / AIR CONDITIONING: CONDENSER: INSTALLATION
1. INSTALL CONDENSER ASSEMBLY WITH RECEIVER
(a) Install the condenser assembly with receiver as shown in the illustration.
HINT
If the condenser is replaced with a new one, add compressor oil to the new condenser.
Capacity:
