Matrix FWD L4-1.8L (2ZR-FE) (2010)
/Page-1818007.png)
8. INSTALL QUICK HEATER ASSEMBLY (w/ PTC Heater)
(a) Install the quick heater assembly as shown in the illustration.
(b) Install the 2 screws.
(c) Engage each clamp.
9. INSTALL AIR MIX DAMPER CONTROL CABLE SUB-ASSEMBLY
(a) Position the gear of the air mix damper control cable sub-assembly and the unit gear as shown in the illustration, and install the air mix damper
control cable sub-assembly.
