Matrix FWD L4-1.8L (2ZR-FE) (2010)
/Page-2309001.png)
Fuel Gauge Sender: Testing and Inspection
2ZR-FE FUEL: FUEL SENDER GAUGE ASSEMBLY: INSPECTION
1. INSPECT FUEL SENDER GAUGE ASSEMBLY
(a) Remove the fuel sender gauge assembly.
(b) Check that the float moves smoothly between F and E.
(c) Measure the resistance between terminals 1 and 2 of the connector according to the value(s) in the table below.
Standard Resistance:
(d) If the value is not as specified, replace the fuel sender gauge assembly.
