Matrix FWD L4-1.8L (2ZR-FE) (2010)
Backup Lamp Switch: Service and Repair
Removal
C59 MANUAL TRANSMISSION / TRANSAXLE: BACK-UP LIGHT SWITCH: REMOVAL
1. REMOVE NO. 2 CYLINDER HEAD COVER See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine
Assembly/Removal
2. REMOVE AIR CLEANER CAP SUB-ASSEMBLY See: Powertrain Management/Fuel Delivery and Air Induction/Throttle Body/Service and
Repair/Removal
3. REMOVE AIR CLEANER CASE See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine
Assembly/Removal
4. DISCONNECT TRANSMISSION CONTROL SHIFT CABLE
(a) Remove the 2 clips, and disconnect the transmission control shift cable.
5. REMOVE BACK-UP LIGHT SWITCH ASSEMBLY
(a) Disconnect the back-up light switch connector and 2 clamps.
(b) Using SST, remove the back-up light switch and gasket from the transaxle case.
SST : 09817-16011