Matrix FWD L4-1.8L (2ZR-FE) (2010)
Dome Lamp Switch: Service and Repair
Removal
LIGHTING (INT): BACK DOOR COURTESY SWITCH: REMOVAL
1. REMOVE BACK DOOR CENTER GARNISH See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Service and Repair/Disassembly
2. REMOVE BACK DOOR SIDE GARNISH LH See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Service and Repair/Disassembly
3. REMOVE BACK DOOR SIDE GARNISH RH See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Service and Repair/Disassembly
4. REMOVE BACK DOOR TRIM BOARD ASSEMBLY See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Service and
Repair/Disassembly
5. REMOVE BACK DOOR LOCK ASSEMBLY
(a) Disconnect the back door lock control cable sub-assembly.
(b) Disconnect the rod as shown in the illustration.
(c) Disconnect the connector.
(d) Remove the 3 bolts and back door lock assembly.