Matrix FWD L4-1.8L (2ZR-FE) (2010)
Drive Belt: Service and Repair
Removal
2ZR-FE ENGINE MECHANICAL: DRIVE BELT: REMOVAL
1. REMOVE NO. 2 CYLINDER HEAD COVER See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine
Assembly/Removal
2. REMOVE ENGINE UNDER COVER RH
3. REMOVE V-RIBBED BELT
(a) Loosen bolts A and B.
(b) Loosen bolt C, then remove the V-ribbed belt.
NOTICE:
Do not loosen bolt D.