Matrix FWD L4-1.8L (2ZR-FE) (2010)
4. REMOVE INNER SEAT TRACK COVER See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Front Seat Assembly
(w/o Seatback Board)/Removal
5. REMOVE FRONT SEAT ASSEMBLY See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Front Seat Assembly (w/o
Seatback Board)/Removal
6. REMOVE VOLTAGE INVERTER ASSEMBLY
(a) Disconnect the connector.
(b) Remove the 2 bolts and the voltage inverter assembly.
Installation
POWER OUTLETS (INT): VOLTAGE INVERTER: INSTALLATION
1. INSTALL VOLTAGE INVERTER ASSEMBLY (for 2 Bolts Bracket Type)
(a) Install the voltage inverter assembly with the 2 bolts.
Torque : 19 Nm (194 kgf-cm, 14 ft-lbf)
(b) Connect the connector.
2. INSTALL FRONT SEAT ASSEMBLY See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Front Seat Assembly (w/o
Seatback Board)/Installation
3. INSPECT FRONT SEAT SLIDE ADJUSTER LOCK See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Front Seat
Assembly (w/o Seatback Board)/Installation
4. INSTALL INNER SEAT TRACK COVER See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Front Seat Assembly (w/o
Seatback Board)/Installation
5. INSTALL OUTER SEAT TRACK COVER See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Front Seat Assembly
(w/o Seatback Board)/Installation
6. INSTALL FRONT SEAT HEADREST ASSEMBLY
7. CONNECT CABLE FROM NEGATIVE BATTERY TERMINAL (w/ Front Seat Side Airbag)
8. INSPECT SRS WARNING LIGHT (w/ Front Seat Side Airbag)
HINT
Inspect the SRS warning light See: Restraint Systems/Air Bag Systems/Testing and Inspection/Pinout Values and Diagnostic
Parameters.