Matrix FWD L4-1.8L (2ZR-FE) (2010)
/Page-882001.png)
Crankshaft Position Sensor: Service and Repair
Installation
2ZR-FE ENGINE CONTROL: CRANKSHAFT POSITION SENSOR: INSTALLATION
1. INSTALL CRANK POSITION SENSOR
(a) Apply a light coat of engine oil to the O-ring on the crank position sensor.
(b) Install the crank position sensor with the bolt.
Torque : 10 Nm (102 kgf-cm, 7.4 ft-lbf)
(c) Connect the crank position sensor connector.
2. INSPECT FOR OIL LEAK
3. INSTALL ENGINE UNDER COVER RH
