toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

ABOUT US
Component Tests and General Diagnostics|Page 3238 > < Component Tests and General Diagnostics|Page 3236

Matrix FWD L4-1.8L (2ZR-FE) (2010)

Page 4
background image

(b) Disconnect the integration relay connector.

(c) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

(d) Reconnect the integration relay connector.

(e) Reinstall the integration relay.

NG --  REPLACE INTEGRATION NO.1 RELAY
OK -- Continue to next step.

6. CHECK HARNESS AND CONNECTOR (INTEGRATION RELAY (EFI MAIN RELAY) - ECM)

(a) Remove the integration relay from the engine room relay block.

Component Tests and General Diagnostics|Page 3238 > < Component Tests and General Diagnostics|Page 3236