Matrix FWD L4-1.8L (2ZR-FE) (2010)
/Page-955001.png)
Main Relay (Computer/Fuel System): Service and Repair
Removal
2ZR-FE ENGINE CONTROL: INTEGRATION RELAY: REMOVAL
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. REMOVE INTEGRATION RELAY
(a) Remove the No. 1 relay block cover.
(b) Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws and then pull the integration relay out of the No. 1 relay
block.
(c) Disconnect the 3 connectors and remove the integration relay.
