Matrix FWD L4-1.8L (2ZR-FE) (2010)
Variable Valve Timing Actuator: Service and Repair
Removal
2ZR-FE ENGINE CONTROL: CAMSHAFT OIL CONTROL VALVE: REMOVAL
1. REMOVE NO. 2 CYLINDER HEAD COVER See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine
Assembly/Removal
2. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY
(a) Exhaust camshaft side:
(1) Disconnect the camshaft timing oil control valve assembly connector.
(2) Remove the bolt and the camshaft timing oil control valve assembly and separate the wire harness bracket.
(3) Remove the O-ring from the camshaft timing oil control valve assembly.
(b) Intake camshaft side:
(1) Disconnect the camshaft timing oil control valve assembly connector.
(2) Remove the bolt and remove the camshaft timing oil control valve assembly.
(3) Remove the O-ring from the camshaft timing oil control valve assembly.