Matrix FWD L4-1.8L (2ZR-FE) (2010)
Evaporative Emission Control Canister: Service and Repair
Removal
2ZR-FE EMISSION CONTROL: CANISTER: REMOVAL
1. REMOVE CHARCOAL CANISTER ASSEMBLY
(a) Disconnect the fuel tank vent hose from the charcoal canister assembly.
(b) Disconnect the vapor pressure sensor connector.
(c) Disconnect the wire harness clamp.
(d) Disconnect the purge line hose from the charcoal canister assembly.
(e) Disconnect the charcoal canister filter sub-assembly and 2 clamps from the charcoal canister assembly.
(f) Remove the 3 bolts and charcoal canister assembly.