Matrix FWD L4-1.8L (2ZR-FE) (2010)
NOTICE:
*
Do not drop the fuel injectors when installing the fuel delivery pipe sub-assembly.
*
Check that the fuel injector assemblies rotate smoothly after installing the fuel delivery pipe sub-assembly.
(b) Tighten the 2 bolts to the specified torque.
Torque : 21 Nm (214 kgf-cm, 15 ft-lbf)
(c) Install the bolt to secure the fuel delivery pipe sub-assembly.
Torque : 21 Nm (214 kgf-cm, 15 ft-lbf)
(d) Install the wire harness bracket with the bolt.
Torque : 5.0 Nm (51 kgf-cm, 44 in-lbf)
4. CONNECT FUEL TUBE SUB-ASSEMBLY
(a) Insert the fuel tube sub-assembly connector into the fuel delivery pipe until a "click" sound can be heard.