Matrix FWD L4-1.8L (2ZR-FE) (2010)
A. Using a permanent marker enter the following information on the label:
^
ECM part number [Refer to the Parts Information section for the CURRENT PART NUMBER]
^
Calibration ID(s) [Refer to the Calibration Identification Chart for the NEW CALIBRATION ID]
^
Dealer Code
^
Repair Date
^
Change Authority [This TSB number]
B. Affix the Authorized Modifications Label to the vehicle at the location shown in Figure 1. The Authorized Modifications Label is available
through the MDC P/N 00451-000001-LBL.
6. Test drive the vehicle to confirm proper vehicle operation.