Matrix FWD L4-1.8L (2ZR-FE) (2010)
Camshaft Position Sensor: Service and Repair
Installation
2ZR-FE ENGINE CONTROL: CAMSHAFT POSITION SENSOR: INSTALLATION
HINT
Although the part name refers to the No. 1 crank position sensors, this procedure is for the camshaft position sensors.
1. INSTALL NO. 1 CRANK POSITION SENSOR
(a) Apply a light coat of engine oil to the O-rings on the No. 1 crank position sensors.
(b) Intake camshaft side:
(1) Install the No. 1 crank position sensor with the bolt.
Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)
(2) Connect the No. 1 crank position sensor connector.
(c) Exhaust camshaft side:
(1) Install the No. 1 crank position sensor with the bolt.
Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)